Skip to content

About The Exams

​Purchase the exam only option. 

 

ISO 50001:2011 Energy Management Systems / Low Carbon Consultant Exam

The exam is 'Open Book' texts allowed are:

  • Approved Documents will be emailed to delegates before the course ​ISO 50001:2018 Standard
  • The course handouts (for those who have attended the CIBSE training)


There are 40 multiple choice questions (worth two marks each). The exam is marked out of 80 and the pass mark is 70%. The time allowed is 60 minutes.
Based on government guidelines, an additional 25% extra time is given for special needs. Time allowed is 75 minutes. Please contact the Training Team if you have any special needs.


Once your attendance on the course has been confirmed you will have access to the exam via your CIBSE Online Learning Portal under the tab ‘My Learning’. This will be available to access for 14 days from the last day of your course. If there is any reason that you should not be able to complete the exam online, please contact a member of the training team at training@cibse.org to make alternative arrangements. 

Multiple choice questions only have one right answer -candidates should note that some questions offer options for 'all of the above' or 'none of the above' so the questions should be read carefully. The questions will cover the whole syllabus, some of which is only covered in the pre-reading. Some of the questions will require good engineering judgement. Some of the questions will require a calculation. You will need a calculator.

The exam is hosted via the CIBSE Learning Management System. Each exam is timed and will automatically log the candidate out once the time has ended. The CIBSE Learning Management System has a single sign on system forcing the candidate to login with a username and password. Once the exam has been started the candidate is unable to pause or restart the exam and must be finished in the allocated time.

Although the exam is 'open book' it is not designed to allow candidates to look up all the answers - material allowed should be regarded as reference. If candidates have not prepared thoroughly by completing the pre-reading and understanding the training course, they may find it hard to finish the exam. CIBSE Training must be notified in advance of any relevant special needs or requirements.


Low Carbon Building Operations Exam

There are 50 multiple choice questions (worth two marks each). The exam is marked out of 100 and the pass mark is 70%. The time allowed is 90 minutes. Based on government guidelines, an additional 25% extra time is given for special needs. Time allowed is 113 minutes. Please contact the Training Team if you have any special needs.

Once your attendance on the course has been confirmed you will have access to the exam via your CIBSE Online Learning Portal under the tab ‘My Learning’. This will be available to access for 14 days from the last day of your course.

If there is any reason that you should not be able to complete the exam online, please contact a member of the training team at training@cibse.org to make alternative arrangements.

The exam is in two parts, a written exam with 50 multiple choice questions (worth one mark each) and a simulation exam where two DEC certificates are to be produced.  Both elements must be passed. Delegates are asked to ensure they have the appropriate software and security privileges installed on the laptop they bring with them to the exam. Should delegates not have appropriate facilities, with sufficient notice CIBSE Training will provide this for them. Trainers are advised to check all delegates’ equipment prior to the software assessment. This is noted in the invigilator procedure.

Multiple choice questions only have one right answer – candidates should note that some questions offer options for ‘all of the above’ or ‘none of the above’ so the questions should be read carefully. 

The questions will cover the whole syllabus, some of which is only covered in the pre-reading. Some of the questions will require good engineering judgement. Some of the questions will require a calculation. You will need a calculator.

The exam is hosted via the CIBSE Learning Management System. Each exam is timed and will automatically log the candidate out once the time has ended. The CIBSE Learning Management System has a single sign on system forcing the candidate to login with a username and password. Once the exam has been started the candidate is unable to pause or restart the exam and must be finished in the allocated time.

Although the exam is 'open book' it is not designed to allow candidates to look up all the answers - material allowed should be regarded as reference. If candidates have not prepared thoroughly by completing the pre-reading and understanding the training course, they may find it hard to finish the exam. CIBSE Training must be notified in advance of any relevant special needs or requirements.



Low Carbon Consultant Design Exam

The exam is 'Open Book' - texts allowed are:

  • Approved Documents L2A and L2B: CLG guide/ Section 6 Regs
  • The course hand-outs (for those who have attended the CIBSE training)


There are 50 multiple choice questions (worth two marks each). The exam is marked out of 100 and the pass mark is 70%. The time allowed is 90 minutes.
Based on government guidelines, an additional 25% extra time is given for special needs. Time allowed is 113 minutes. Please contact the Training Team if you have any special needs.

Once your attendance on the course has been confirmed you will have access to the exam via your CIBSE Online Learning Portal under the tab ‘My Learning’. This will be available to access for 14 days from the last day of your course.

If there is any reason that you should not be able to complete the exam online, please contact a member of the training team at training@cibse.org to make alternative arrangements. 

Multiple choice questions only have one right answer – candidates should note that some questions offer options for ‘all of the above’ or ‘none of the above’ so the questions should be read carefully. The questions will cover the whole syllabus, some of which is only covered in the pre-reading. Some of the questions will require good engineering judgement. Some of the questions will require a calculation. You will need a calculator.

The exam is hosted via the CIBSE Learning Management System. Each exam is timed and will automatically log the candidate out once the time has ended. The CIBSE Learning Management System has a single sign on system forcing the candidate to login with a username and password. Once the exam has been started the candidate is unable to pause or restart the exam and must be finished in the allocated time.

Although the exam is 'open book' it is not designed to allow candidates to look up all the answers - material allowed should be regarded as reference. If candidates have not prepared thoroughly by completing the pre-reading and understanding the training course, they may find it hard to finish the exam. CIBSE Training must be notified in advance of any relevant special needs or requirements.


Low Carbon Consultant Design / Scotland Section 6 Building Regulations Exam
 

There are 50 multiple choice questions. There is only one correct answer for each multiple-choice question. The time allowed is 90 minutes.
Based on government guidelines, an additional 25% extra time is given for special needs. Time allowed is 113 minutes. Please contact the Training Team if you have any special needs.

You will have access to the exam via your CIBSE Online Learning Portal under the tab ‘My Learning’. This will be available to access for 14 days from the last day of your course.

If there is any reason that you should not be able to complete the exam online, please contact a member of the training team at training@cibse.org to make alternative arrangements.

Multiple choice questions only have one right answer – candidates should note that some questions offer options for ‘all of the above’ or ‘none of the above’ so the questions should be read carefully. 

The questions will cover the whole syllabus, some of which is only covered in the pre-reading. Some of the questions will require good engineering judgement. Some of the questions will require a calculation. You will need a calculator.

The exam is hosted via the CIBSE Learning Management System. Each exam is timed and will automatically log the candidate out once the time has ended. The CIBSE Learning Management System has a single sign on system forcing the candidate to login with a username and password. Once the exam has been started the candidate is unable to pause or restart the exam and must be finished in the allocated time.

Although the exam is 'open book' it is not designed to allow candidates to look up all the answers - material allowed should be regarded as reference. If candidates have not prepared thoroughly by completing the pre-reading and understanding the training course, they may find it hard to finish the exam. CIBSE Training must be notified in advance of any relevant special needs or requirements.



Energy Savings Opportunity Scheme (ESOS) Exam

There are 30 multiple choice questions (worth two marks each.) The exam is marked out of 60 and the pass mark is 70%. The time allowed is 45 minutes. Based on government guidelines, an additional 25% extra time is given for special needs. Time allowed is 57 minutes. Please contact the Training Team if you have any special needs.

Once your attendance on the course has been confirmed you will have access to the exam via your CIBSE Online Learning Portal under the tab ‘My Learning’. This will be available to access for 14 days from the last day of your course.

If there is any reason that you should not be able to complete the exam online, please contact a member of the training team at training@cibse.org to make alternative arrangements. 

Multiple choice questions only have one right answer – candidates should note that some questions offer options for ‘all of the above’ or ‘none of the above’ so the questions should be read carefully. Questions with more than one option ticked will be marked as wrong. The questions will cover the whole syllabus, some of which is only covered in the pre-reading. The questions will cover the whole syllabus, some of which is only covered in the pre-reading. Some of the questions will require good engineering judgement. Some of the questions will require a calculation. You will need a calculator.

The exam is hosted via the CIBSE Learning Management System. Each exam is timed and will automatically log the candidate out once the time has ended. The CIBSE Learning Management System has a single sign on system forcing the candidate to login with a username and password. Once the exam has been started the candidate is unable to pause or restart the exam and must be finished in the allocated time.

Although the exam is 'open book' it is not designed to allow candidates to look up all the answers - material allowed should be regarded as reference. If candidates have not prepared thoroughly by completing the pre-reading and understanding the training course, they may find it hard to finish the exam. CIBSE Training must be notified in advance of any relevant special needs or requirements.


Heat Networks Code of Practice (CP1) Exam

The exam is 'Open Book' - texts allowed are:

  • The Heat Networks Code of Practice pdf
  • The course hand-outs (for those who have attended the CIBSE training)

 

There are 50 multiple choice questions (worth two marks each). The exam is marked out of 100 and the pass mark is 70%. The time allowed is 90 minutes.
Based on government guidelines, an additional 25% extra time is given for special needs. Time allowed is 113 minutes. Please contact the Training Team if you have any special needs.


Once your attendance on the course has been confirmed you will have access to the exam via your CIBSE Online Learning Portal under the tab ‘My Learning’. This will be available to access for 14 days from the last day of your course.

If there is any reason that you should not be able to complete the exam online, please contact a member of the training team at training@cibse.org to make alternative arrangements. 

Multiple choice questions only have one right answer – candidates should note that some questions offer options for ‘all of the above’ or ‘none of the above’ so the questions should be read carefully. The questions will cover the whole syllabus, some of which is only covered in the pre-reading. Some of the questions will require good engineering judgement. Some of the questions will require a calculation. You will need a calculator.

The exam is hosted via the CIBSE Learning Management System. Each exam is timed and will automatically log the candidate out once the time has ended. The CIBSE Learning Management System has a single sign on system forcing the candidate to login with a username and password. Once the exam has been started the candidate is unable to pause or restart the exam and must be finished in the allocated time.

Although the exam is 'open book' it is not designed to allow candidates to look up all the answers - material allowed should be regarded as reference. If candidates have not prepared thoroughly by completing the pre-reading and understanding the training course, they may find it hard to finish the exam. CIBSE Training must be notified in advance of any relevant special needs or requirements.


Part L Exam

The exam is 'Open Book' - texts allowed are:

Approved Documents L2A and L2B: CLG guide
The course hand-outs (for those who have attended the CIBSE training)

There are 20 multiple choice questions (worth one mark each) the pass mark is 70%. The time allowed is 40 minutes. 
Based on government guidelines, an additional 25% extra time is given for special needs. Time allowed is 50 minutes. Please contact the Training Team if you have any special needs.

Once your attendance on the course has been confirmed you will have access to the exam via your CIBSE Online Learning Portal under the tab ‘My Learning’. This will be available to access for 14 days from the last day of your course.

If there is any reason that you should not be able to complete the exam online, please contact a member of the training team at training@cibse.org to make alternative arrangements. 

Multiple choice questions only have one right answer - candidates should note that some questions offer options for 'all of the above' or 'none of the above' so the questions should be read carefully. Questions will cover the Part L regulations including the 2013 updates. Some of the questions will require good engineering judgement. 

The exam is hosted via the CIBSE Learning Management System. Each exam is timed and will automatically log the candidate out once the time has ended. The CIBSE Learning Management System has a single sign on system forcing the candidate to login with a username and password. Once the exam has been started the candidate is unable to pause or restart the exam and must be finished in the allocated time.

Although the exam is 'open book' it is not designed to allow candidates to look up all the answers - material allowed should be regarded as reference. If candidates have not prepared thoroughly by completing the pre-reading and understanding the training course, they may find it hard to finish the exam. CIBSE Training must be notified in advance of any relevant special needs or requirements.

Notification of examination results

All candidates are notified of the result of the examination by either letter or email. Such notification will normally be sent within 2 weeks of the examination unless the result is the subject of a complaint.


Re-sits

Delegates are offered the opportunity of one re sit at no charge if they fail the exam.  The re sits are arranged with the training manager.  If the re sit is not successful we recommend the candidate takes some further training before trying again. If they would like to re sit a further time then there is a charge associated with this. There is no limit to the number of times a candidate can re sit.
 

Complaints and Appeals

If you would like to make a complaint against examination results or process, you are able to make use of our complaints procedure. CIBSE Training will ensure that the person decision-making in the complaint process will be different from those involved in the original discrepancy. Complaints must be processed by the completion of our complaints form, below is the procedure once the form has been submitted:
 

  • A member of the training team will be in contact, usually via email, within two working days to confirm we have received the submission. Details on the steps which will be taken to handle the complaint will also be included in the email.
  • ​An investigation will take place to resolve the complaint.
  • All complaints should be resolved within 14 days of the initial form submission.
  • If a resolution can not made within the 14 days, the delegate will be notified and kept updated on any progress.


If you would like to make an appeal against the examination results or process, you are able to make use of the appeals procedure. CIBSE Training will ensure that the person decision-making in the appeals process will be different from those involved in the original discrepancy.

  • All appeals should be made in writing to CIBSE Training via email to training@cibse.org.
  • The appellant will be informed in writing of the outcome of the appeal.


Make an enquiry to CIBSE Training if:
 

  • A delegate feels there may be a mistake in the exam questions.


Privacy Statement

Follow this link to CIBSE privacy policy
http://www.cibse.org/terms-and-conditions/privacy-policy


CIBSE Ref: CB22