CIBSE, working with ICOM Energy and experts from the manufacturing, design, and installation and commissioning sectors, have produced this Applications Manual, giving comprehensive guidance on the design, installation, commissioning and operation and maintenance of heating systems (it does not cover medium temperature or high temperature hot water systems i.e. those having flow temperatures above 90 °C).
It also addresses the two very different aspects of design: that intended for a new building, and that for a refurbishment or retrofit project.
This publication should be widely read and used by all those responsible for heating systems in non-domestic buildings, and should contribute significantly to providing better heating in many buildings.
Contents:
1. Introduction
1.1 Background
1.2 How to use this Applications Manual
1.3 Sources of further information
References
2. Design decisions and criteria: new buildings
2.1 Introduction
2.2 Strategic design decisions
2.3 Design criteria for boilers in new buildings
References
3. Design decisions and criteria: refurbishment
3.1 Introduction
3.2 Drivers for refurbishment
3.3 Scope for refurbishment
3.4 Constraints
3.5 Statutory regulations and guidance
3.6 Identification of existing heating types
3.7 Evaluation of existing heating systems
3.8 Evaluation of heating loads
3.9 Reducing energy consumption
3.10 Options for refurbishment using low carbon technologies
3.11 Whole life costs and payback
3.12 Performance criteria for replacement boiler plant
References
4. Major components of heating systems
4.1 Introduction
4.2 Heat sources (boilers)
4.3 Distribution network
4.4 Heat emitters
4.5 Flue and chimney design
4.6 Air supply and ventilation
4.7 Fuel storage
References
5. Controls
5.1 Introduction
5.2 Circuit design
5.3 Boiler controls
5.4 Avoiding excessive boiler cycling
5.5 Demand-based boiler control and system inhibit
5.6 Boiler sequence control
5.7 Burner controls
5.8 Time controls
5.9 Temperature controls
5.10 Hot water controls
References
6. Installation
6.1 General
6.2 Legislation and guidance
6.3 Site facilities
6.4 On-site storage and protection of equipment
6.5 Installation of equipment
6.6 Installation of circulation and distribution equipment
6.7 Installation of heat emitters
References
7. Testing, commissioning and maintenance
7.1 Introduction
7.2 System testing
7.3 System cleaning, flushing and water treatment
7.4 Pre-commissioning
7.5 Commissioning
7.6 Final reporting and documentation
7.7 Continued evaluation and record keeping
References
8. Troubleshooting for hot water heating systems
8.1 Introduction
Reference
Index
Acknowledgements
Principal author and Chair: Arnold Teekaram
Committee: Keith Brant, David Davies, Hywel Davies, Yan Evans, Peter Gammon, Barry Gregory, Malcom Gunn, David Hughes, Fiona Lowrie, Stephen Laws, George Moss, Keith Nelson, Brian Price, Peter Roge, Wayne Rose, Claire Ruston